Phase transforming in situ gels for sustained and controlled transmucosal drug delivery via the intravaginal route.

Direct, reliable, controlled, and sustained drug delivery to female reproductive tract (FRT) remains elusive, with conventional dosage forms falling way short of the mark, leading to premature leakage, erratic drug delivery, and loss of compliance. Historically, the intravaginal route remains underserved by the pharmaceutical sector. To comprehensively address this, we turned our focus to phase-transforming sol-gels, using poloxamers, a thermosensitive polymer and, doxycycline (as hyclate salt, DOXH) as our model agent given its potential use in sexually transmitted infections (STIs). We further enhanced mucoadhesiveness through screening of differing viscosity grade hydroxypropyl methyl celluloses (HPMCs). The optimised sol-gels remained gelled at body temperature (<37 °C) and were prepared in buffer aligned to vaginal cavity pH and osmolality. Lead formulations were progressed based on their ability to retain key rheological properties, and acidic pH in the presence of simulated vaginal fluid (SVF). From a shelf-life perspective, DOXH stability, gelation temperature (Tsol-gel), and pH to three months (2-8 °C) was attained. In summary, the meticulously engineered, phase-transforming sol-gels provided sustained mucoretention despite dilution by vaginal fluid, paving the way for localised antimicrobial drug delivery at concentrations that potentially far exceed the minimum inhibitory concentration (MIC) for target STI-causing bacteria of the FRT.

Opportunities for Bioactive Glass in Gastrointestinal Conditions: A Review of Production Methodologies, Morphology, Composition, and Performance.

Bioactive glasses (BGs) are widely used in orthopedic and dental applications for their ability to stimulate endogenous bone formation and regeneration. BG applications more recently broadened to include soft tissue conditions, based on their ability to stimulate angiogenesis, soft tissue regeneration, and wound healing. Sol-gel synthesis has helped facilitate this expansion, allowing formulators to tailor the morphological characteristics of the BG matrix. The effectiveness of BGs in skin wound healing is viewed as a gateway for their use as both a therapeutic and drug delivery platform in other soft tissue applications, notably gastrointestinal (GI) applications, which form the focus of this review. Recent changes in international guidelines for GI conditions shifted clinical objectives from symptom management to mucosal wound healing. The additional scrutiny of proton pump inhibitor (PPI) safety, increasing burden of disease, and financial costs associated with gastroesophageal reflux disease (GERD), peptic ulcer disease (PUD), and inflammatory bowel disease (IBD) open new clinical possibilities for BG. This narrative literature review intersects materials engineering, formulation science, and clinical practice, setting it apart from prior literature. Broadly, current evidence for BG applications in GI conditions is sparse and under-developed, which this review directly addresses. It explores and synthesizes evidence that supports the potential use of sol-gel-derived BG for the efficacious treatment of soft tissue applications, with specific reference to GI conditions. An overview with comparative analysis of current BG synthesis techniques and associated challenges is presented, and influences of composition, biologically active ions, and morphological characteristics in soft tissue applications are explored. To contextualize this, sol-gel-derived BGs are proposed as a dual, tailorable therapeutic and drug delivery platform for upper and lower GI conditions. Future directions for this largely untapped area of translational research are also proposed, based on extant literature.

Anti-CD4 antibody and dendrimeric peptide based targeted nano-liposomal dual drug formulation for the treatment of HIV infection.

AIMS: Development and characterization of LAM and DTG loaded liposomes conjugated anti-CD4 antibody and peptide dendrimer (PD2) to improve the therapeutic efficacy and to achieve targeted treatment for HIV infection. MAIN METHODS: A 2-level full factorial design was used to optimize the preparation of dual drug loaded liposomes. Optimized dual drug loaded ligand conjugated liposomes were assessed for their cytotoxicity and cell internalization on TZM-bl cells. Anti-HIV efficiency of the dual drug loaded liposomes were screened for their inhibitory potential in TZM-bl cells and the activities were confirmed using Peripheral Blood Mononuclear Cells (PBMCs). KEY FINDINGS: The particle size of the optimized dual drug-loaded liposomes was 133.7 ± 4.04 nm, and the spherical morphology of the liposomes was confirmed by TEM analysis. The entrapment efficiency was 34 ± 4.9 % and 54 ± 1.8 % for LAM and DTG, respectively, and a slower in vitro release of LAM and DTG was observed when entrapped into liposomes. The cytotoxicity of the dual drug loaded liposomes was similar to the cytotoxicity of free drug solutions. Conjugation of anti-CD4 antibody and PD2 did not significantly influence the cytotoxicity but it enhanced the uptake of liposomes into the cells. Conjugated dual drug loaded liposomes exhibited better HIV inhibition with lower IC50 values (0.0003 ± 0.0002 µg/mL) compared to their free drug solutions (0.002 ± 0.001 µg/mL). The liposomal formulations have shown similar activities in both screening and confirmatory cell-based assays. SIGNIFICANCE: The results demonstrated the cell targeting ability of dual drug loaded liposomes conjugated with anti-CD4 antibody and peptide dendrimer. Conjugated liposomes also improved anti-HIV efficiency of LAM and DTG.

Porous silicon embedded in a thermoresponsive hydrogel for intranasal delivery of lipophilic drugs to treat rhinosinusitis.

Intranasal delivery is the most preferred route of drug administration for treatment of a range of nasal conditions including chronic rhinosinusitis (CRS), caused by an infection and inflammation of the nasal mucosa. However, localised delivery of lipophilic drugs for persistent nasal inflammation is a challenge especially with traditional topical nasal sprays. In this study, a composite thermoresponsive hydrogel is developed and tuned to obtain desired rheological and physiochemical properties suitable for intranasal administration of lipophilic drugs. The composite is comprised of drug-loaded porous silicon (pSi) particles embedded in a poloxamer 407 (P407) hydrogel matrix. Mometasone Furoate (MF), a lipophilic corticosteroid (log P of 4.11), is used as the drug, which is loaded onto pSi particles at a loading capacity of 28 wt%. The MF-loaded pSi particles (MF@pSi) are incorporated into the P407-based thermoresponsive hydrogel (HG) matrix to form the composite hydrogel (MF@pSi-HG) with a final drug content ranging between 0.1 wt% to 0.5 wt%. Rheomechanical studies indicate that the MF@pSi component exerts a minimal impact on gelation temperature or strength of the hydrogel host. The in-vitro release of the MF payload from MF@pSi-HG shows a pronounced increase in the amount of drug released over 8 h (4.5 to 21-fold) in comparison to controls consisting of pure MF incorporated in hydrogel (MF@HG), indicating an improvement in kinetic solubility of MF upon loading into pSi. Ex-vivo toxicity studies conducted on human nasal mucosal tissue show no adverse effect from exposure to either pure HG or the MF@pSi-HG formulation, even at the highest drug content of 0.5 wt%. Experiments on human nasal mucosal tissue show the MF@pSi-HG formulation deposits a quantity of MF into the tissues within 8 h that is >19 times greater than the MF@HG control (194 ± 7 µg of MF/g of tissue vs. <10 µg of MF/g of tissue, respectively).

A systematic review of ultrasound-mediated drug delivery to the eye and critical insights to facilitate a timely path to the clinic.

Ultrasound has long been identified as a promising, non-invasive modality for improving ocular drug delivery across a range of indications. Yet, with 20 years of learnings behind us, clinical translation remains limited. To help address this, and in accordance with PRISMA guidelines, the various mechanisms of ultrasound-mediated ocular drug delivery have been appraised, ranging from first principles to emergent applications spanning both ex vivo and in vivo models. The heterogeneity of study methods precluded meta-analysis, however an extensive characterisation of the included studies allowed for semi-quantitative and qualitative assessments. Methods: In this review, we reflected on study quality of reporting, and risk of bias (RoB) using the latest Animal Research: Reporting of In Vivo Experiments (ARRIVE 2.0) guidelines, alongside the Systematic Review Centre for Laboratory animal Experimentation (SYRCLE) RoB tools. Literature studies from 2002 to 2022 were initially characterised according to methods of ultrasound application, ultrasound parameters applied, animal models employed, as well as safety and efficacy assessments. This exercise contributed to developing a comprehensive understanding of the current state of play within ultrasound-mediated ocular drug delivery. The results were then synthesised and processed into a guide to aid future study design, with the goal of improving the reliability of data, and to support efficient and timely translation to the clinic. Results: Key attributes identified as hindering translation included: poor reporting quality and high RoB, skewed use of animals unrepresentative of the human eye, and the over reliance of reductionist safety assessments. Ex vivo modelling studies were often unable to have comprehensive safety assessments performed on them, which are imperative to determining treatment safety, and represent a pre-requisite for clinical translation. Conclusion: With the use of our synthesised guide, and a thorough understanding of the underlying physicochemical interactions between ultrasound and ocular biology provided herein, this review offers a firm foundation on which future studies should ideally be built, such that ultrasound-mediated ocular drug delivery can be translated from concept to the coalface where it can provide immense clinical benefit.

Design and development of novel, short, stable dynorphin-based opioid agonists for safer analgesic therapy.

Kappa opioid receptors have exceptional potential as an analgesic target, seemingly devoid of many problematic Mu receptor side-effects. Kappa-selective, small molecule pharmaceutical agents have been developed, but centrally mediated side-effects limit clinical translation. We modify endogenous dynorphin peptides to improve drug-likeness and develop safer KOP receptor agonists for clinical use. Using rational, iterative design, we developed a series of potent, selective, and metabolically stable peptides from dynorphin 1-7. Peptides were assessed for in vitro cAMP-modulation against three opioid receptors, metabolic stability, KOP receptor selectivity, desensitisation and pERK-signalling capability. Lead peptides were evaluated for in vivo efficacy in a rat model of inflammatory nociception. A library of peptides was synthesised and assessed for pharmacological and metabolic stability. Promising peptide candidates showed low nanomolar KOP receptor selectivity in cAMP assay, and improved plasma and trypsin stability. Selected peptides showed bias towards cAMP signalling over pERK activity, also demonstrating reduced desensitisation. In vivo, two peptides showed significant opioid-like antinociception comparable to morphine and U50844H. These highly potent and metabolically stable peptides are promising opioid analgesic leads for clinical translation. Since they are somewhat biased peptide Kappa agonists they may lack many significant side-effects, such as tolerance, addiction, sedation, and euphoria/dysphoria, common to opioid analgesics.

Fabrication and Characterization of Clozapine Nanoemulsion Sol-Gel for Intranasal Administration.

Clozapine is the most effective antipsychotic for treatment-resistant schizophrenia. However, it causes many adverse drug reactions (ADRs), which lead to poor treatment outcomes. Nose-to-brain (N2B) drug delivery offers a promising approach to reduce peripheral ADRs by minimizing systemic drug exposure. The aim of the present study was to develop and characterize clozapine-loaded nanoemulsion sol-gel (CLZ-NESG) for intranasal administration using high energy sonication method. A range of oils, surfactants, and cosurfactants were screened with the highest clozapine solubility selected for the development of nanoemulsion. Pseudoternary phase diagrams were constructed using a low-energy (spontaneous) method to identify the microemulsion regions (i.e., where mixtures were transparent). The final formulation, CLZ-NESG (pH 5.5 ± 0.2), comprising 1% w/w clozapine, 1% w/w oleic acid, 10% w/w polysorbate 80/propylene glycol (3:1), and 20% w/w poloxamer 407 (P407) solution, had an average globule size of ≤30 nm with PDI 0.2 and zeta potential of -39.7 ± 1.5 mV. The in vitro cumulative drug release of clozapine from the nanoemulsion gel at 34 °C (temperature of nasal cavity) after 72 h was 38.9 ± 4.6% compared to 84.2 ± 3.9% with the control solution. The permeation study using sheep nasal mucosa as diffusion barriers confirmed a sustained release of clozapine with 56.2 ± 2.3% cumulative drug permeated after 8 h. Additionally, the histopathological examination found no severe nasal ciliotoxicity on the mucosal tissues. The thermodynamic stability studies showed that the gel strength and viscosity of CLZ-NESG decreased after temperature cycling but was still seen to be in "gel" form at nasal temperature. However, the accelerated storage stability study showed a decrease in drug concentration after 3 months, which can be expected at elevated stress conditions. The formulation developed in this study showed desirable physicochemical properties for intranasal administration, highlighting the potential value of a nanoemulsion gel for improving drug bioavailability of clozapine for N2B delivery.

Application of Sol-Gels for Treatment of Gynaecological Conditions-Physiological Perspectives and Emerging Concepts in Intravaginal Drug Delivery.

Approaches for effective and sustained drug delivery to the female reproductive tract (FRT) for treating a range of gynaecological conditions remain limited. The development of versatile delivery platforms, such as soluble gels (sol-gels) coupled with applicators/devices, holds considerable therapeutic potential for gynaecological conditions. Sol-gel systems, which undergo solution-to-gel transition, triggered by physiological conditions such as changes in temperature, pH, or ion composition, offer advantages of both solution- and gel-based drug formulations. Furthermore, they have potential to be used as a suitable drug delivery vehicle for other novel drug formulations, including micro- and nano-particulate systems, enabling the delivery of drug molecules of diverse physicochemical character. We provide an anatomical and physiological perspective of the significant challenges and opportunities in attaining optimal drug delivery to the upper and lower FRT. Discussion then focuses on attributes of sol-gels that can vastly improve the treatment of gynaecological conditions. The review concludes by showcasing recent advances in vaginal formulation design, and proposes novel formulation strategies enabling the infusion of a wide range of therapeutics into sol-gels, paving the way for patient-friendly treatment regimens for acute and chronic FRT-related conditions such as bacterial/viral infection control (e.g., STDs), contraception, hormone replacement therapy (HRT), infertility, and cancer.

Clozapine-Encapsulated Binary Mixed Micelles in Thermosensitive Sol-Gels for Intranasal Administration.

(1) Background: Clozapine is the most effective antipsychotic. It is, however, associated with many adverse drug reactions. Nose-to-brain (N2B) delivery offers a promising approach. This study aims to develop clozapine-encapsulated thermosensitive sol-gels for N2B delivery. (2) Methods: Poloxamer 407 and hydroxypropyl methylcellulose were mixed and hydrated with water. Glycerin and carbopol solutions were added to the mixture and stirred overnight at 2-8 °C. Clozapine 0.1% w/w was stirred with polysorbate 20 (PS20) or polysorbate 80 (PS80) at RT (25 °C) before being added to the polymer solution. The final formulation was made to 10 g with water, stirred overnight at 2-8 °C and then adjusted to pH 5.5. (3) Results: Formulations F3 (3% PS20) and F4 (3% PS80) were selected for further evaluation, as their gelation temperatures were near 28 °C. The hydrodynamic particle diameter of clozapine was 18.7 ± 0.2 nm in F3 and 20.0 ± 0.4 nm in F4. The results show a crystallinity change in clozapine to amorphous. Drug release studies showed a 59.1 ± 3.0% (F3) and 53.1 ± 2.7% (F4) clozapine release after 72 h. Clozapine permeated after 8 h was 20.8 ± 3.0% (F3) and 17.8 ± 3.1% (F4). The drug deposition was higher with F4 (144.8 ± 1.4 µg/g) than F3 (110.7 ± 2.7 µg/g). Both sol-gels showed no phase separation after 3 months. (4) Conclusions: Binary PS80-P407 mixed micelles were more thermodynamically stable and rigid due to the higher synergism of both surfactants. However, binary mixed PS20-P407 micelles showed better drug permeation across the nasal mucosa tissue and may be a preferable carrier system for the intranasal administration of clozapine.

Multi-physics study of acoustofluidic delivery agents' clustering behavior.

Acoustofluidicly manipulated microbubbles (MBs) and echogenic liposomes (ELIPs) have been suggested as drug delivery systems for the 'on demand' release of drug in target tissue. This requires a clear understanding of their behaviour during ultrasonication and after ultrasonication stops. The main focus of this study is to investigate the behaviour of MBs and ELIPs clusters after ultrasonication stops and the underlaying cause of cluster diffusion considering electrostatic repulsion, steric repulsion and Brownian motion. It also examines the capability of existing models used to predict MBs' attraction velocity due to secondary radiation force, on predicting ELIPs' attraction velocity. Tunable resistive pulse sensing (TRPS) and phase analysis light scattering (PALS) techniques were used to measure zeta potentials of the agents and the size distributions were measured using TRPS. The zeta potentials were found to be -2.43 mV and -0.62 mV for Definity™ MBs, and -3.62 mV and -2.35 mV for ELIPs using TRPS and PALS, respectively. Both agents were shown to have significant cluster formation at pressures as low as 6 kPa. Clusters of both agents were shown to diffuse as sonication stops at a rate that approximately equals the sum of the diffusion coefficients of the agents forming them. The de-clustering behaviours are due to Brownian motion as no sign of electrostatic repulsion was observed and particles movements were observed to be faster for smaller diameters. These findings are important to design and optimise effective drug delivery systems using acoustofluidically manipulated MBs and ELIPs.

Development and Optimization of Supercritical Fluid Extraction Setup Leading to Quantification of 11 Cannabinoids Derived from Medicinal Cannabis.

In this study, the optimal setup of supercritical fluid extraction (SFE) was designed and developed, leading to the quantitation of 11 distinct cannabinoids (cannabidivann (CBDV), tetrahydrocannabivann (THCV), cannabidiol (CBD), cannabigerol (CBG) cannabidiolic acid (CBDA), cannabigerolic acid (CBGA), cannabinol (CBN), delta 9-tetrahydrocannabinol (Δ9-THC), delta 8-tetrahydrocannabinol (Δ8-THC), cannabichomere (CBC) and delta 9-tetrahydrocannabinol acid (THCA-A)) extracted from the flowers of medicinal cannabis (sp. Sativa). Supercritical carbon dioxide (scCO2) extraction was performed at 37 °C, a pressure of 250 bar with the maximum theoretical density of CO2 (893.7 kg/m3), which generated the highest yield of cannabinoids from the flower-derived extract. Additionally, a cold separator (separating chamber) was used and positioned immediately after the sample containing chamber to maximize the yield. It was also found that successive washing of the extract with fresh scCO2 further increased yields. Ultra-high performance liquid chromatography coupled with DAD (uHPLC-DAD) was used to develop a method for the quantification of 11 cannabinoids. The C18 stationary phase was used in conjunction with a two solvent system gradient program resulting in the acquisition of the well-resolved chromatogram over a timespan of 32 min. The accuracy and precision of isolated cannabinoids across inter-and intra-day periods were within acceptable limits (<±15%). The assay was also fully validated and deemed sensitive from linearity, LOQ, and LOD perspective. The findings of this body of work are expected to facilitate improved conditions for the optimal extraction of select cannabinoids using scCO2, which holds promise in the development of well-characterized medicinal cannabis formulations. As to our best knowledge, this is the first study to report the uHPLC quantification method for the analysis of 11 cannabinoids from scCO2 extract in a single run with more than 1 min peak separation.

Extraction of medicinal cannabinoids through supercritical carbon dioxide technologies: A review.

The pharmaceutical importance of cannabis is growing due to the natural non-psychoactive and psychoactive cannabinoids. For medicinal and forensic purposes, the effective extraction and quantification are essential to fully utilise the natural cannabinoids. The supercritical fluid extraction (SFE) process has gained increasing interest due to its selective extraction, short processing time (partly due to the efficient solvent removal process - supercritical fluid to vapour - leaving a solvent free product), low running cost, and low impact on the environment, compared to that of most conventional extraction methods. In this review, the extraction of cannabinoids through SFE methods have been summarised. The advantages of SFE of cannabinoids over conventional extraction procedures; such as microwave-assisted extraction, solid phase microextraction, hard-cap espresso, soxhlet extraction, high-throughput homogenization, ultrasound-assisted extraction, vacuum distillation of lipid-based extract, and liquid-liquid extraction are discussed. Furthermore, this review examines the importance of the SFE of cannabinoids by coupling with various conventional extraction methods, separation techniques, selection of a suitable co-solvent/modifier, and appropriate sample preparation. Additionally, the applications of using SFE technology and cannabinoids are reviewed with a focus on industrial, pharmaceutical, waste by-products, and purification.

Shell properties and concentration stability of acoustofluidic delivery agents.

This paper investigates the shell elastic properties and the number-concentration stability of a new acoustofluidic delivery agent liposome in comparison to Definity™, a monolayer ultrasonic contrast agent microbubble. The frequency dependent attenuation of an acoustic beam passing through a microbubble suspension was measured to estimate the shell parameters. The excitation voltage was adjusted to ensure constant acoustic pressure at all frequencies. The pressure was kept at the lowest possible magnitude to ensure that effects from nonlinear bubble behaviour which are not considered in the analytical model were minimal. The acoustofluidic delivery agent shell stiffness Sp and friction Sf parameters were determined as (Sp = 0.11 N/m, Sf = 0.31 × 10-6 Kg/s at 25 °C) in comparison to the Definity™ monolayer ultrasound contrast agent which were (Sp = 1.53 N/m, Sf = 1.51 × 10-6 Kg/s at 25 °C). When the temperature was raised to physiological levels, the friction coefficient Sf decreased by 28% for the monolayer microbubbles and by only 9% for the liposomes. The stiffness parameter Sp of the monolayer microbubble decreased by 23% while the stiffness parameter of the liposome increased by a similar margin (27%) when the temperature was raised to 37 °C. The size distribution of the bubbles was measured using Tunable Resistive Pulse Sensing (TRPS) for freshly prepared microbubbles and for bubble solutions at 6 h and 24 h after activation to investigate their number-concentration stability profile. The liposome maintained >80% of their number-concentration for 24 h at physiological temperature, while the monolayer microbubbles maintained only 27% of their number-concentration over the same period. These results are important input parameters for the design of effective acoustofluidic delivery systems using the new liposomes.

A systematic review and meta-analysis of the association between clozapine and norclozapine serum levels and peripheral adverse drug reactions.

RATIONALE: Clozapine is the most effective antipsychotic for treatment-refractory schizophrenia for reducing positive psychotic symptoms. It is associated with a reduction in hospitalisation and overall mortality. In spite of this, clozapine remains underutilised due to its complex adverse drug reaction (ADR) profile. OBJECTIVE: This systematic review aims to investigate the association of clozapine and norclozapine serum levels, and peripheral ADRs. METHODS: Studies were searched from four electronic databases (PubMed, EMBASE, PsycINFO and CINAHL) from inception to 12 June 2020. Studies were included if they had adult patients, provided data on steady-state trough clozapine or norclozapine levels and reported on clozapine-associated ADRs. Pregnant women, case reports and series were excluded. RESULTS: A statistically significant correlation was found for clozapine serum levels and triglycerides (n = 70; r = 0.303, 95% CI 0.0119-0.546, p = 0.042), heart rate (n = 137; r = 0.269, 95% CI 0.0918-0.486, p = 0.035), and overall combined ADRs (n = 160; r = 0.264, 95% CI 0.110-0.405, p = 0.001), but not for absolute neutrophil count (n = 223; r = - 0.164, 95% CI - 0.529-0.253, p = 0.444) or total white cell count (n = 18; r = 0.0176, 95% CI - 0.203-0.237, p = 0.878). Interestingly, norclozapine serum levels were found to be statistically correlated to triglycerides (n = 120; r = 0.211, 95% CI 0.0305-0.378, p = 0.022), total cholesterol (n = 120; r = 0.272, 95% CI 0.0948-0.432, p = 0.003) and weight gain (n = 118; r = 0.208, 95% CI 0.0261-0.377, p = 0.025). CONCLUSIONS: Heart rate, triglycerides and combined ADRs are significantly correlated with clozapine levels, and triglycerides, total cholesterol and weight gain with norclozapine levels. Future prospective, randomised controlled studies are needed to identify the cause-effect relationship between clozapine levels and peripheral ADRs.

Surface-engineered nanoliposomes with lipidated and non-lipidated peptide-dendrimeric scaffold for efficient transdermal delivery of a therapeutic agent: Development, characterization, toxicological and preclinical performance analyses.

The current study aimed to develop novel peptide dendrimer (PD)-conjugated nanoliposomal formulations of asenapine maleate (ASP) for improvement in the transdermal delivery and pharmacokinetic profile of the drug. Novel arginine-terminated PDs (+/-lipidation) were prepared by solid phase peptide synthesis, followed by conjugation onto ASP nanoliposomes. The nanoliposomes were characterized for particle size (and polydispersity index), zeta potential (ZP), drug entrapment efficiency, shape and morphology, differential scanning calorimetry and FT-IR spectroscopy. Ex vivo skin permeation and retention studies demonstrated considerably higher percutaneous permeation of ASP from the developed nanoliposomes (Q24 = 794.31 ± 54.89 µg/cm2, Jss = 105.40 ± 4.8 µg/cm2/h, ER = 36.85 ± 2.89 for liposomes with lipidated peptide dendrimer (Lipo-PD2)) in comparison with passive diffusion studies (Q24 = 63.09 ± 3.56 µg/cm2, Jss = 3.01 ± 0.23 µg/cm2/h). Confocal Laser Scanning Microscopy (CLSM) confirmed the higher percutaneous penetration of Lipo-PD2 in comparison with liposomes without the dendrimer. In vitro cytotoxicity determined on HaCaT cell line demonstrated CTC50 of >1000 µg/mL for both the synthesized PDs and Lipo-PD2. Pharmacokinetic studies in male Sprague Dawley rats revealed considerably and significantly higher t1/2 = 82.32 ± 14.48 h and AUC0-t = 4403.34 ± 367.10 h.ng/mL, from the developed formulation, compared to orally administered ASP (t1/2 = 21.64 ± 2.53 h and AUC0-t = 2303.55 ± 444.5 h.ng/mL), demonstrating higher bioavailability and longer retention in vivo. Additionally, in vivo skin retention, brain uptake studies and pharmacodynamics of the developed formulations were investigated. Stability studies indicated that the formulations were stable up to relatively stable with respect to size, ZP and drug content for 4 months at the tested conditions. This study demonstrates that the developed PD-conjugated nanoliposomal formulations can effectively serve as a transdermal delivery strategy for ASP.

Nose-to-brain delivery of antipsychotics using nanotechnology: a review.

INTRODUCTION: Orally-administered antipsychotics are effective in the management of psychosis-related disorders although generation-specific adverse drug reactions (ADRs) significantly hinder clinical outcomes, driven by issues such as patient non-compliance. Direct nose-to-brain (N2B) delivery of antipsychotics via the olfactory epithelium could avert peripheral ADRs by maximizing cerebral drug concentrations, and reducing drug levels in the periphery. However, there exist physicochemical challenges related to psychotropic drugs, alongside biochemical barriers associated with targeting the olfactory region. Nanotechnological approaches present a viable strategy for the development of intranasal antipsychotic formulations where drug stability, mucosal absorption and cerebrospinal fluid (CSF)-bioavailability can be optimized. AREAS COVERED: This review explores the unique anatomical features of the nasal cavity as a pathway for antipsychotic drug delivery to the brain. Nanocarrier-based approaches to encapsulate antipsychotics, and enhance stability, absorption and bioavailability are explored. The aim of this review is to determine current knowledge gaps for direct N2B psychotropic drug delivery, and identify clinically acceptable strategies to overcome them. EXPERT OPINION: The olfactory epithelium may be the most effective and direct administration route for antipsychotic delivery to the central nervous system (CNS). This research is novel and has the potential to revolutionize the mode of delivery of neurological medicines to the CNS in the future.

Evaluation of microalgae and cyanobacteria as potential sources of antimicrobial compounds.

In recent decades, marine microorganisms have become known for their ability to produce a wide variety of secondary bioactive metabolites. Several compounds have been isolated from marine microorganisms for the development of novel bioactives for the food and pharmaceutical industries. In this study, a number of microalgae were evaluated for their antimicrobial activity against gram-positive and gram-negative bacteria, including food and plant pathogens, using various extraction techniques and antimicrobial assays. Disc diffusion and spot-on-lawn assays were conducted to confirm the antimicrobial activity. To measure the potency of the extracts, minimum inhibition concentrations (MIultCs) were measured. Three microalgae, namely Isochrysis galbana, Scenedesmus sp. NT8c, and Chlorella sp. FN1, showed strong inhibitory activity preferentially against gram-positive bacteria. These microalgal species were then selected for further purification and analysis, leading to compound identification. By using a mixture of different chromatography techniques gas chromatography-mass spectrometry (GC-MS) and high-performance liquid chromatography (HPLC) and ultra-high performance liquid chromatography-quadrupole time-of-flight mass spectrometry (UHPLC-Q-TOF-MS), we were able to separate and identify the dominant compounds that are responsible for the inhibitory activity. Additionally, nuclear magnetic resonance (NMR) was used to confirm the presence of these compounds. The dominant compounds that were identified and purified in the extracts are linoleic acid, oleic acid, docosahexaenoic acid (DHA) and eicosapentaenoic acid (EPA). These compounds are the potential candidates that inhibit the growth of gram-positive bacteria. This indicates the potential use of microalgae and their antimicrobial compounds as biocontrol agents against food and plant pathogens.

Ultrasound-responsive nanobubbles for enhanced intravitreal drug migration: An ex vivo evaluation.

The intravitreal route faces many challenges in rapidly and effectively reaching posterior eye pathology, with administered therapeutics experiencing non-specific distribution around and premature clearance from ocular tissues. Nanobubbles and ultrasound may improve outcomes of intravitreally administered drugs by influencing the directionality of drug-containing particle migration. In this study, we assessed the impact of trans-scleral or corneal ultrasound application on the distribution of intravitreally-injected nanobubbles. Rhodamine-tagged gas entrapped nanobubble formulations were prepared and injected into ex vivo bovine and porcine eyes and subjected to ultrasound (1 MHz, 0-2.5 W/cm2, 50-100% duty, 60 s). Bovine eyes were partially dissected to visualize the vitreous humor and particle migration was evaluated via optical fluorescence spectroscopy. Directional migration in porcine eyes was evaluated using a snap freezing protocol complemented by quantification of regional fluorescence. The impact on nanobubble migration following pars-plana injection and sequential ultrasound cycle application from scleral or corneal-surface positions was also assessed. Administration of ultrasound significantly enhanced the directional migration of nanobubbles in both ex vivo models, with multiple corneal ultrasound cycles promoting greater migration of dye-filled nanobubbles to posterior regions of the vitreous. Moreover, particles moved in a directional manner away from the ultrasound wave source demonstrating an ability to effectively control the rate and path of nanobubble migration. These findings establish an encouraging new and safe modality enabling rapid distribution of intravitreally-injected therapeutics where expeditious therapeutic intervention is warranted.

Development of a hybrid peptide dendrimer micellar carrier system and its application in the reformulation of a hydrophobic therapeutic agent derived from traditional Chinese medicine.

The discovery that a cane toad poison-derived steroid, bufalin can significantly impact cancer cell proliferation supports its potential use in cancer therapy. However, its poor aqueous solubility and tissue deposition characteristics hamper its broader application as an anticancer therapeutic agent in its own right. To address this we developed an amphiphilic dendrimer-based delivery system, which self-assembles into discrete micelles in an aqueous environment. The bufalin-micelle inclusion complex was prepared by the co-precipitation method and their presence was confirmed by dynamic light scattering (DLS), zeta potential and differential scanning calorimetry (DSC) and transmission electron microscopy (TEM) measurements. The self-assembled bufalin-containing micelles were found to form at/above the dendrimer concentration of 105.38 µmol L-1, and showed a more than threefold increase in the aqueous solubility (142.9 µg mL-1) of bufalin, when compared with a saturated bufalin aqueous solution (42.4 µg mL-1), and two non-assembling peptides of similar composition (79.3 and 62.5 µg mL-1 respectively).

Toxicity evaluation and nasal mucosal tissue deposition of dexamethasone-infused mucoadhesive in situ nasal gelling systems.

To demonstrate safety of a developed intranasal dexamethasone-infused in situ gelling formulation, quantification of a validated clinical biomarker indicative of cytotoxic potential using a human sinonasal explant model was first confirmed. Systematic cytotoxicity studies using the lactate dehydrogenase (LDH) detection assay revealed no elevation from baseline, in LDH levels, with tissue integrity of explanted human nasal mucosa also maintained; this was further corroborated using tissue histopathological examination. Next, with safety confirmed ex vivo, freshly excised human nasal tissue was utilised to quantify dexamethasone release from the lead sol-gel systems; this being achieved through development and validation of a HPLC-UV analytical method, which reliably quantified controlled therapeutic release and deposition into mucosal tissue. Collectively, these findings indicate promise in the safety of each excipient within the concentrations employed in the functional sol-gel system, complemented by successful and reliable drug release and deposition into human nasal mucosal tissue. These findings pave the way for application of the dexamethasone-based sol-gel system to the extended delivery of corticosteroids to nasal mucosa in the management of localised inflammatory conditions of an acute and chronic nature, such as chronic rhinosinusitis, which can be expected to benefit from controlled and extended drug delivery characteristics imparted by appropriately engineered in situ gelling systems.